Live demo — data resets daily at 03:00 UTC. Nothing you enter is saved. Server UI →

Hardware Modules

Source: Documentation/ESH_index.md and individual Documentation/ESH10000*.md files. The files linked below are the authoritative per-module specifications — this index is navigation only.


Module Index

Product ID Module Name Category Channels
ESH10000025 GPIO Module Digital I/O 108
ESH10000028 AMUX Module Signal Routing Variable
ESH10000121 MPIO-I2C Module Digital I/O 96+
ESH10000239 I2C Long Range 4ch Communication Variable
ESH10000355 N 6IDC Module Power & Control 6+
ESH10000359 N5 TOP COMM Module Communication Variable
ESH10000517 Environment Module Sensors Variable
ESH10000533 M.2 PSU Module Power & Control ~100
ESH10000534 PoE M.2 Module Power & Control Variable
ESH10000535 Sparrow N-TOP Module Communication Variable
ESH10000536 M.2 Active Load 2ch Power & Control 2+
ESH10000540 Fixture Electronics Sparrow Test Fixtures Variable
ESH10000543 Fixture Link Module Test Fixtures Variable
ESH10000560 Tone Module Audio Variable
ESH10000568 MPIO-96 SPI Module Digital I/O 96+
ESH10000589 4 DPDT Relay Module Signal Routing 8+
ESH10000590 Precision ADC/DAC Module Analog I/O 21

By Category

Analog I/O

  • ESH10000590 — 12× 24-bit ADC + 8× 16-bit DAC; calibration; NumericResult; PseudoDigital modes

Digital I/O

  • ESH10000025 — 96 bidirectional GPIO; per-bank voltage control 1.2 V–5.0 V; register-parallel I/O
  • ESH10000121 — 96 MPIO; I²C master/slave; PseudoDigital
  • ESH10000568 — 96 MPIO; SPI support; flexible signal routing

Signal Routing

  • ESH10000028 — 10× independent 8:1 analog MUX; cross-connect; I²C/UART/SPI/JTAG bus routing
  • ESH10000589 — 4× DPDT relay

Communication

Power & Control

  • ESH10000355 — 6× isolated DC power channels; precision current/voltage
  • ESH10000533 — Dual-channel PMBus PSU (LTC3889); ~100 channels
  • ESH10000534 — Power over Ethernet + M.2 socket
  • ESH10000536 — 2-channel active load for M.2

Sensors

  • ESH10000517 — Temperature, humidity, environmental monitoring

Audio

Test Fixtures


Channel Naming Convention

All channels follow the pattern:

{ModuleSlotIndex}.{ProductID}.{ChannelName}

Examples:

0.ESH10000590.ADC_CH0        ← slot 0, Precision ADC/DAC, first ADC input
1.ESH10000025.GPIO_OUT_00    ← slot 1, GPIO module, first output
0.ESH10000121.I2C_BUS_0      ← slot 0, MPIO-I2C, first I2C master

ModuleSlotIndex is the physical slot position in the Accordion backplane (0-based).


Chip Datasheet References

Low-level register maps and electrical specs for ICs used on the modules:

An unhandled error has occurred. Reload 🗙

Rejoining the server...

Rejoin failed... trying again in seconds.

Failed to rejoin.
Please retry or reload the page.

The session has been paused by the server.

Failed to resume the session.
Please retry or reload the page.